tmp /fwupdate.real -m /tmp /openwrt-ath79-generic-ubnt-nanostation-ac-loco-squashfs-factory.bin Hexdump -Cv /bin /ubntbox | sed 's/14 40 fe fe/00 00 00 00/g' | hexdump -R > /tmp /fwupdate.realĪfter that the factory image can be installed using the patched binary:
#NANOBEAM M2 400 DD WRT DOWNLOAD INSTALL#
To install unsigned firmware the fwupdate.real binary (which is in fact just a symlink to ubntbox) must be patched: The instructions probably won't work for other versions. Please make sure you have got firmware version v8.7 installed or. But since there are no mtd utilities available on the device the original fwupdate.real binary must be used.
The firmware for this ubiquiti device is signed. You will have to use SSH / Putty on firstboot, and install Luci manually. See → OpenWrt installation on WA and XC boardsĭo remember that if you are still using daily snapshots for the install, that Luci web interface is not be installed by default. Main differences between NanoBeam AC and NanoBeam AC Gen2: After extensively studying my OEM bootlog with the OEM bootlog from Ubiquiti Nanostation AC loco, realising they load the same WA 8.5.0 firmware, and checking the TFTP recovery procedure, I simply installed the Loco AC firmware on my NanoBeam AC and it worked.Įverything seems to work, only I have the wrong model name in the OpenWrt status screen, and either there is no 2nd 2.4GHz management radio or it is not found by the OpenWrt (UBNT interface did offer a 2nd SSID for management, but I never tried that, it may simply be an alias on the first 5GHz radio)
0 kommentar(er)
